FAAC DAAB EP104, Instruction Manual

Page: 46 / 74

46
Instruction manual version 1 for software version 4.04
INSTRUCTION MANUAL FOR DAAB EP104 CONTROL BOARD
No. Name Range Factory Setting Ref. page
d261 Type of control signal when activated 0 - 1 0 33
0 Pulse
1 Signal when loop is activated
d262 Half operation 1 - 3 3 33
1 Half 1
2 Half 2
3 Halves 1 and 2
d263 Limited opening 0 - 1 0 33
0 Disabled
1 Opening for the time set in channels C412 and C414
d270 Disable opening /closing function in LOOP2. 0 - 6 0 33
0 Disabled, normal opening/closing function. (Programmable input has no function for LOOP2)
1 Opening/closing possible only if there is a signal at programmable input 1
2 Opening/closing possible only if there is a signal at programmable input 2
3 Opening/closing possible only if there is a signal at programmable input 3
4 Opening/closing possible only if there is a signal at programmable input 4
5 Opening/closing possible only if there is a signal at programmable input 5
6 Opening/closing possible only if there is a signal at programmable input 6
d275 Delayed opening 0.0-9.9 sec 0.0
d290 Interlock opening 0 - 1 0 33
0 Disabled
1 Sends a normal open signal to the remote door, regardless of the setting in rX01