FAAC DAAB EP104, Instruction Manual

Page: 63 / 74

DAAB STYRAUTOMATIK EP104
63
Instruction manual version 1 for software version 4.04
INSTRUCTION MANUAL FOR DAAB EP104 CONTROL BOARD
Programmable input 4
No. Name Range Factory Setting Ref. page
P400 Channels in programmable input 4 0 - 1 1 27
0 Disabled
1 Enabled
P460 Control function 0-5 0 27
0 Disabled
1 Open
2 Close
3 Stop
4 Open/close
5 Open/stop/close
P461 Type of control signal when activated 1 - 2 1 27
1 Pulse
2 Signal for as long as the input is activated
P462 Half operation 1 - 3 3 27
1 Half 1
2 Half 2
3 Halves 1 and 2
P463 Limited opening 0 - 1 0 27
0 Disabled
1 Timed opening based on the time specified in C412 and/or C414.
P470 Motor lock 0 - 1 0 27
0 Disabled
1 The barrier cannot be operated without a signal at programmable input 4. If the signal disappears the
barrier is stopped.
P480 Park 0 - 2 2 27
0 Disabled
1 Automatic closing disabled after the input is activated, reset by another control signal
2 Automatic closing disabled by a constant signal
P490 Interlock opening 0 - 1 0 27
0 Disabled
1 Opens the local door if P460 is set to open, and passes the signal on to the remote door
P496 Blocking disabled for local and remote doors. Only
works if there is a constant signal and P461 has the
value 2.
0 - 1 0 27
0 Disabled
1 Active
P498 Automatic closing disabled for remote door Only
works if there is a constant signal
0 - 1 0 27
0 Disabled
1 Active