36
ENGLISH
B.
INSTALLATION OF ASSEMBLED AUTOMATED SYSTEM
SECURING THE ON-WALL SUPPORT PROFILE
Refer to chapter A of the kit automated system installation.
fig. 56
There are 2 types of aluminium profiles for the cross beam:
-
Support profile
The support profile is used to secure the automated system to a load bearing structure in metal or masonry , free of any significant
deformation.
Position the cross beam on the floor, withdraw the ‘parachute’ cables from the housing, and remove the housing. If necessary,
remove from the profile also those components (e.g. motor, carriages, transmission pulley) which could hamper you while securing
to the wall, loosening the nuts from the plates.
To then position the removed parts, refer to figures 4-5-7.
Free-standing profile
It is the aluminium profile which, assembled to the support profile, grants the free-standing feature to the cross beam.
It is used when the cross beam cannot be completely secured to a bearing structure or when the support surface is not even
