31
ENGLISH
13A INSTALLING THE CLOSING HOUSING
• Lay the closing housing on the spacers you had previously
mounted, as shown in Fig. 46
or
.
• To keep the housing open, lift it (Fig. 46 ref.
) and push it
(Fig.46 ref.
) toward the profile until the metal protrusion fits
in the profile seat.
• Secure the parachute cables in the appropriate seats (Fig. 46
ref.
)
• The closing housing is secured in correspondence with the 3
securing brackets (fig. 46 ref.
).
• The closing housing is pre-marked to adapt it to different leaf
thickness values. Eliminate excess profile by cutting at the
points indicated in fig. 46 ref.
.
If you are using the internal release, in order to close
the housing correctly, drill a hole near the release
knob.
fig. 46
