29
ENGLISH
Check if the parachute cables are present, and, if necessary,
secure them on the two ends of the support profile, housing the
bigger end of the cable in the seats (Fig. 42 ref.
).
Check if the three anti-vibration spacers (Fig. 42 ref.
) are
present, and, if necessary, insert them on the outer edge of the
support profile, positioning them at the ends and centrally.
11A INSTALLING THE PARACHUTE AND THE SPACERS
12A FITTING THE SIDE PANELS A140 AIR - T
To fit the side panels, use the screws on the support profile to fit
the side panels as shown in fig. 43 ref.
.
You must also install the 3 guard securing brackets - two side and
one centre - by inserting the side plates fig. 44 ref.
fig. 42
fig. 44
fig. 43
Important
: The side covers are a necessary element to
assure stiffness and resistance of the telescopic
profile structure.
These features cannot be assured in the event
of omitted assembly
