15
200
200
30
30
30
37,5
80
ENGLISH
fig. 11
fig. 12
1.2A INSTALLING THE ELECTRONIC MODULE BAR AND THE TELESCOPIC PROFILE BAR
The mechanical stops are 4 for single leaf and 8 for double leaf.
Insert the sliding guide on the profile fig 12-
and insert sideways
the mechanical stop fig 12-
.
Then secure it with the 2 Allen screws fig.12
and fig.13-
.
1.3A ASSEMBLING THE SLIDING GUIDE
Warning:
the bar with tie rods and the bar for telescopic
profile must always be installed
before installing the head profile. Insert the bar sideways
with the tied rods for installing the electronic module on
the support profile fig.11-
and the bar for securing the
telescopic profile fig.11-
.
When cutting the bar for the telescopic profile, refer to
fig.6 , fig.8 and section 2A1 pg.18.
If the rod electronic module was not fitted, you can fit the
small plates with the relevant screws instead of it
Important
: The central and side mechanical stops must
be fitted sideways, after the sliding guide, as first element
of the A140 AIR-T door.
fig. 10
ceiling
