FAAC A140 AIR-T Series, Manual

Page: 54 / 76

52
ENGLISH
PROGRAMMING THE E100 - E140 BOARD rev.4.5
Display Function Function Default
O F
Opening force Opening force
Sets the force of the door during opening in the event Sets the force of the door during opening in the event
of an obstacle for the time tF.
of an obstacle for the time tF.
Adjustment: from 1 to 10 Adjustment: from 1 to 10
7
CF
Closing force Closing force
Sets the force of the door during closing in the event of Sets the force of the door during closing in the event of
an obstacle for the time tF.
an obstacle for the time tF.
Adjustment: from 1 to 10 Adjustment: from 1 to 10
7
t F
Push time OF and CF Push time OF and CF
Sets the time during which the door during opening and Sets the time during which the door during opening and
closing remains on the obstacle with a push OF and
closing remains on the obstacle with a push OF and
CF.
CF.
Can be adjusted from 0.0 to 3.0 sec. in 0.1second Can be adjusted from 0.0 to 3.0 sec. in 0.1second
steps.
steps.
1
b A
Battery Kit
It enables you to set the battery kit functions.
For the function descriptions, refer to the dedicated
paragraph:
0 battery kit NOT ENABLED
1 battery kit ENABLED
standard operation – last manoeuvre opening
2
battery kit ENABLED
standard operation – last manoeuvre closing
3 battery kit ENABLED
operation NO standard – last manoeuvre opening
4 battery kit ENABLED
operation NO standard – last manoeuvre closing
0
EL
Motor lock kit Motor lock kit
Enables to set the motor lock functions. Enables to set the motor lock functions.
0
Off Off Motor lock not installed. Motor lock not installed.
1
Night Night The motor lock locks the leaves only in the The motor lock locks the leaves only in the
“Night” operating mode
“Night” operating mode
2
One way One way
+ Night
+ Night
The motor lock locks the leaves in the The motor lock locks the leaves in the
“Night” and “one way” operating modes.
“Night” and “one way” operating modes.
3
Always Always The motor lock locks the leaves whenever The motor lock locks the leaves whenever
the leaves close, irrespective of the set
the leaves close, irrespective of the set
operating function.
operating function.
1
S U
Surveillance Surveillance
Enables to select the presence of the motor lock Enables to select the presence of the motor lock
supervision.
supervision.
no no
Motor lock surveillance device not installed. Motor lock surveillance device not installed.
YY Motor lock surveillance device installed. Motor lock surveillance device installed.
n o
n d n d
Night mode internal sensor deactivation delay Night mode internal sensor deactivation delay
Parameter for delaying deactivation of the Night mode Parameter for delaying deactivation of the Night mode
internal sensor.
internal sensor.
Adjustable from 0 to 60 sec. in 1-second steps. Adjustable from 0 to 60 sec. in 1-second steps.
0 0
S t
Status of the automated system Status of the automated system
Exit from programming, storage of the settings and Exit from programming, storage of the settings and
return to the automated system status display.
return to the automated system status display.
00
00 Closed Closed 05 05 Closes Closes
01 01 Opening Opening 06 06 Emergency Emergency
02 02 Open
Open
07 07
Manual mode Manual mode
03 03 Pause
Pause
08 08
Setup (flashing) Setup (flashing)
04 04
Night pause Night pause
Important :
After having fitted the battery kit, you
need to enable it from the board to
make it operating: to this end use
push-buttons F +/- on parameter bA.
For any additional explanations, please
refer to chapter
3 Battery.