FAAC A1000, User Manual, Page: 97 / 116

A1000 97 532210 04 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
21. MAINTENANCE
!
In order to keep the system operating safety and efficiently and to reduce
the number of malfunctions and breakdowns, routine maintenance and the
periodic replacement of parts must be carried out as indicated in
 27
.
ROUTINE MAINTENANCE must be performed every 6 months.
 
Frequency of replacements is indicated based on number of operation
cycles for components subject to wear; in years for components subject
to deterioration.
!
All maintenance operations must exclusively be performed by technical-
professional personnel.
Only the installer/maintenance technician is authorised to open the casing
to access the automation housing.
21.1 CALCULATION ESTIMATE OF CYCLES
PERFORMED
If there is a E1SL board fault and the cycle counter data is lost with
error code 53, the number of cycles performed since the last service
should be estimated.
R1 = number of days elapsed since the last motor replacement (see
SYSTEM REGISTER)
R2 = number of hours of operation per day
R3 = door cycle time (opening time + pause + closing time)
!
The installer must take on responsibility for indicating parameters R1,
R2 and R3
Calculate:
R4 = R1 * R2 *3600
Calculate the ESTIMATED NUMBER OF CYCLES :
R4 / R3
Afterwards, from the SDK EVO; in the Cycle counter menu (5) in the
 27
Maintenance programme and periodic replacements
ROUTINE MAINTENANCE
OPERATION
Check automation fastening to the wall check the support profile is solidly secured to the wall
in case of installation with self-supporting Head Section:
Check the fixing screws of the support profile -
 28
Check the fastening of the Motor and return Pulley check screws securing the motors on the support profile
 22
Check on carriages check screws securing to the leaf
check and adjust the counter wheels of carriages and leaf depth and height screws
 30
 31
Check mechanical stops check position of mechanical stops and fixing screws
 20
Belt tensioning check check belt tensioning
 37
Cleaning clean: Sliding Guide; Lower Guide Shoe; Carriages
 100
Functional system check perform required checks and procedures to ensure integrity of the load bearing structure
and leaf frames
perform functional checks
 16
 100
PERIODIC REPLACEMENTS
 20
PART/COMPONENT FREQUENCY
Operation cycles
Time (years)
Replacements
Recommended / Mandatory
Motor 1 000 000 -- Recommended
Return pulley 1 000 000 -- Recommended
Lower guide shoe 2 000 000 -- Mandatory
Carriages 2 000 000 -- Mandatory
Belt 1 000 000 5 Mandatory
Pad mechanical stop 2 000 000 5 Mandatory
Safety fall arrest cables -- 5 Mandatory
Emergency battery -- 1 Recommended
Maintenance section
 93
, enter the calculated number of cycles.