background image

A1000 

40 

532210   04    -  Rev.A

44

  

43

  

2

 

6

Nm

46

  

45

  

2

 

6

Nm

1

2

1

Tr

ansla

tion of the original instruc

tions

ENGLISH

11.4  MOUNTING THE SIDE PROFILES

The side profiles enable the casing to remain closed.

 

!

If there are no side profiles, cover mounting brackets should be used.

1.  Place 6 plates on the support profile (for profiles longer than 3m) 

43

-

.

2.  Mount the side profiles for H100  casings on the ends of the sup-

port profile.

3.  Fasten each side profile using the 3 screws provided 

44

-

.

 

!

Use at least one central bracket 

46

-

 for profiles longer than 3 m.

11.5  INSTALLING THE CASING BRACKETS

 

!

The brackets enable the casing to be closed if side profiles are not used.

Brackets are available for H100 covers.
It is recommended to use a central bracket for profiles longer than 3 m.

1.  Place 2 plates 

45

-

 on the support profile (for profiles longer 

than 3 m, a third plate should be added).

2.  Mount the brackets and fasten them using the screws provided 

46

-

.

Summary of Contents for A1000





















































































































Reviews: