| English
4
JET 500 | JET 750 | JET 1000L
SAFETY MEASURES
Read carefully the operating instructions
before assembling and starting. The appli-
ance must not be used by operators who
are not thoroughly acquainted with the
instructions handbook (operating instruc-
tions). Moreover, the appliance must not be
used by persons under the age of 16.
f
The user is liable towards third parties in the area
where the appliance is in operation.
f
Before starting it is necessary to make sure that
the necessary electrical protection measures, are
provided by means of a test carried out by a spe-
cialist.
While the pump is operating no operators
have to be in the liquid to be pumped.
The pump may be connected only by means
of a safety switch for fault currents, with
a rated opening current up to 30 mA and
a socket with an earth contact installed in
compliance with the regulations. Protec-
tion: at least 10 Amps.
Operation in swimming pools and garden ponds is
not recommended.
For other operation, the provisions in conformity
with the standard VDE 0100 part 702 must be re-
spected.
CAUTION: Before checking, unplug the
pump from the mains!
f
Replacing the power supply cable requires using
special tools and therefore you must address to
the authorized after-sales service.
f
The noise (continuous equivalent in dbA) of the
motor-driven pumps is less or equal (≤) to 70 dbA.
f
The voltage indicated on the pump’ s rating plate
must correspond to the available mains voltage.
f
The temperature of the liquid conveyed must not
exceed 35°C.
f
Never attempt to lift or move the pump by stretch-
ing the power-supply cable whilst it is plugged into
the mains.
f
Make sure that the plugged electrical connections
are in an area safe from flooding and are protect-
ed from humidity.
f
Before use it is necessary to check that the plug
and the mains connection line are not damaged.
f
Unplug from the mains before performing any
work on the pump.
f
Avoid directly exposing the pump to the jet of water.
f
The user is responsible for complying with the lo-
cal regulations concerning assembly and safety.
f
The user by taking appropriate measures (e.g. install-
ing an alarm, reserve pump and the like) will have to
exclude the possibility of indirect damage caused by
flooding premises due to failure of the pump.
f
In the event of the pump failing, repair work may
only be carried out by the repair workshops of the
technical service. Only genuine spare parts must
ENGLISH
be used.
f
It is notified that in conformity with the law on
product liability we cannot be held responsible
for the damage caused by our appliance:
1. Because of improper repairs not carried out by
the personnel of the assistance points autho-
rized by us; or
2.
If genuine spare parts are not used to replace
parts; or
3.
If the indications and provisions given in the
instructions handbook are not complied with.
The same provisions hold for the accessories.
RESISTANCE
This pump should not be used to convey inflam-
mable, combustible or explosive liquids.
TECHNICAL DATA
Article Number
42924
42925 42926
Model
JET
500
JET
750
JET
1000L
Voltage
V
220-
230
220-
230
220-
230
Hz
50
50
50
Output power
hp
0,50
0,75
1,00
W
370
550
750
Input power
W
500
750
1000
Sound power
level
dB(A)
75
75
75
Max pressure
bar
4,20
4,60
5,00
Max head
m
42
46
50
Max flow
m
3
/h
2,4
2,7
3,3
DN
1
inch
1
1
1
2
inch
1
1
1
Stator length
mm
63#
71#
71#
L70
L62
L80
Weight
Kg
10,8
12,15
14,45
Motor
Speed of rota-
tion
rpm
2.850
2.850
2.850
Protection
IP44
IP44
IP44
Insulation Class
B
B
B
Continuous Duty
S1
S1
S1
Internal Thermal
Protector
✓
✓
✓
USE
f
For irrigation and watering of lawns, gardens, vege-
table patches, etc.
