EZ EZ-220, Hardware Manual

Page: 141 / 150

C-21
Text Panel Hardware Manual
Error 8: DT_ELEM_NOT_FOUND
Screen Message: DATA TABLE VALUE NOT FOUND: (Txxxxx [,xxx] [/BB]
Condition: This error will be displayed if the driver found a tag that does not
exist on the data table. For example, the Row or Column number
was out of the range of the PLC’s data table limits.
Error 9: PLC_TIMEOUT
Screen Message: PLC TIMEOUT
Condition: This error will display if the driver did not receive a reply to a
message in the allowed time.
Error 10: DT_STRING_OUT_BOUNDS
Screen Message: MESSAGE STRING OUT OF BOUNDS: (Txxxxx [,xxx] [/BB]
Condition: This error will display if the driver found a tag that does not exist
on the data table. For example, the message string included a
column number that was out of the range of the PLC’s data table
limits.
Error 14: INVALID_DRIVER_STATE
Screen Message: INVALID DRIVER STATE
Condition: Never should occur.
Error 15: GENERAL_ERROR
Screen Message: ERROR CODE xxx
Condition: Never should occur.
Error 16: LAST_ERROR
Screen Message: N/A
Condition: Never should occur.
IDEC PLC WITH COMPUTER LINK PROTOCOL
Error 1: INVALID PLC ATTRIBUTES - USING DEFAULTS
This error is reported when the PLC driver receives an invalid set of PLC attributes.
The default attributes will be used when this error occurs.
Error 2: PLC TIMEOUT
The Driver did not receive a reply to a message in the allowed time. Check the
communication between panel and PLC.
Error 3: DATA RANGE ERROR
This error occurs when response from PLC to read or write had a data range error.
Error 4: T/C PRESET CHANGE
This error occurs when response from plc for an invalid, present value is written to
timer or counter.
Error 5: CALENDAR/CLOCK DATA
This error occurs when invalid data is sent to calendar or clock. Command was sent
to the PLC while it was still processing an existing command.