EZ EZ-220, Hardware Manual

Page: 61 / 150

57 EZ-TEXT-M-E
Text Panel Hardware Manual
8. To create PLC Messages 001, 002, and 003 as shown in the screen
capture above, perform the following steps:
a. Click on the Add next PLC Message button.
b. Type in the Message Text fi eld, “F3 Button Message ”.
c. Click on the Press to accept Message edit button to save it.
d. Click on the Add next PLC Message button.
e. Type in the Message Text fi eld, “PLC Release Bit Ackn ”.
f. Click on the Press to accept Message edit button to save it.
g. Click on the Add next PLC Message button.
h. Type in the Message Text fi eld, “ESC for Local Msgs ”.
i. Click on the Press to accept Message edit button to save it.
9. You are now fi nished confi guring the messages for this tutorial, click
on OK to exit the Message Edit screen.
10. The final part of Step 3
is to configure the panel
system PLC addresses. To
confi gure PLC addresses,
click on the
Configure
P a n e l S y s t e m P L C
addresses
button.