EZ EZ-220, Hardware Manual

Page: 62 / 150

58
EZ-TEXT-M-E
Text Panel Hardware Manual
11. The Panel System PLC Address Setup screen will appear. Enter
settings as follows:
a. Type in “ V3000” in the Line One fi eld. Select BCD as the DATA
Type . Type in “V3001” in the Line Two fi eld. Select BCD as the
DATA Type .
b. The panel beeper is defaulted to Yes . If you do not want to hear
the beeper each time a button is pressed, select No under Enable
Beeper .
c. Click on the OK button to save and exit.
12. You are now ready to write the project to the EZSeries Set Point Display
Text Panel.
13. Click on the Write to Panel button on the Main Configuration
Screen .