EZ EZ-220, Hardware Manual

Page: 138 / 150

C-18
Text Panel Hardware Manual
Error M005: Message number is out of range.
Solution : Message number is out of range. Valid range is 1-256
Miscellaneous Error Messages:
Error Z001: Error in printing page.
Solution : (1) Check whether you have printer attached to the PC and set to Ready; (2) if still receiving this
error, reboot the system and check printer to PC connection.
Error Z002: You are trying to read from an invalid fi le.
Reason : Either project fi le is corrupted or you are trying to open an non-EZSeries Set Point Display Text
Panel fi le.
Solution : If the project fi le is corrupted, then, recreate the project.
Error Z003: The fi le may be corrupted.
Reason : The Exec fi le is corrupted.
Solution : If you receive this error message consistently, please report this to technical support.
Error Z004: Unable to open the PLC driver fi le.
Reason : Invalid PLC driver fi le.
Solution : If you receive this error message consistently, please report this to technical support.
Error Z005: The Maximum message length has exceeded.
Reason : Maximum message length exceeded.
Solution : Reduce length of message.
Error Z006: Unknown value type encountered while loading project. Known values are 0
(BCD) and 1 (Binary)
Reason : Invalid value type found while reading project from disk.
Solution : Project fi le in the panel is corrupted. Reload the project to the panel.
Error Z007: Discrete addresses are not allowed here.
Reason : Discrete addresses are not allowed in the EZSeries Set Point Display Text Panel.
Solution : Use the correct address type.
Error Z008: Invalid Device Type
Reason : The connected equipment may not be an EZSeries Set Point Display Text Panel.
Solution : Ensure that you are connected to an EZSeries Set Point Display Text Panel.
Error Z009: Error in project fi le Line : <line number> Column : <column number> <fi lename>
Reason : The project fi le (XML version) is invalid.
Solution : Use a valid project fi le.