6) Press
［▲］
or
［▼］
key to input the time.
※
Each time you press
［▲］
or
［▼］
key,
the value changes by 1 minutes. Holding
down the key for a second can change the
value by 10 minutes. Holding down the
key for longer than 4 seconds can change
the value by 1 hour, and holding down
the key for longer than 8 seconds can
change the value by 10 hours.
7) Press
［
Set
］ key.
a)While the unit is controlled, displayed
setting time (blinking) is determined and
selected timer mode control gets started.
b)If the unit is under suspension, displayed
time (blinking) is determined.
・
Indicator changes to display measured
temperature.
・「
Set key lamp
（
SV
）」
turns off a light.
※
If no key operation is done for longer than a
minute while setting timer, indicator changes to
display measured time. In such a case, please
repeat the procedure from 1) in a completely
opposite manner.
6)Changing setting time
7) Determining the setting time
For more details about
running and stopping 1-
step operation, please
refer to Page 35.
-32-
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
5.00
●
●
●
PV
Run
Stop
Mode
Set
▼
▲
Def
h.m
SV
℃
Alarm
Heating
Auto stop
Auto start
1Step
Defrost
24Hour
Pro.
○
○
○
○
○
○
○
23.5
●
●
○
※
If no key operation is done for longer than a
minute while setting timer and etc, indicator changes
to display measured time. When changing display by
[Mode] key during control, the display returns to the
measured temperature after approx. 10 seconds.
※
Setting time for timer
can be shared with all
the timer mode except
24-hour cycle operation.
