-58-
Before shipping, the opening side of the inner door is left.
・
LTI-400E
・
700E
Inner door Left side
→
Right side
（
1
）
Remove all the screws from the hinge of inner door
with cross-slot screwdriver.
Number of hinge for LTI-400E is 2, and 3 hinges for
LTI-700E.
※
Let someone hold the inner door so that the inner door
won't fall down.
Attach removed screws to the bath that fixes the hinge.
（
2
）
Remove the magnet catch of removed inner door and
screws of the cover with using cross-slot screwdriver.
（
3
）
Exchange the position of magnet catch, catch cover and
cover for changing the opening side.
（
4
）
Remove screws from the opposite side of the bath and
attach removed screws to the inner door to fix.
※
Let someone hold the door until you finished attaching
2 or 3 screws. It makes the procedure easier.
※
Attach the inner door and make sure that the door won't
hit the packing of the bath. If the door hit the packing,
loosen the screws and try to fix the door with raising the
door a little upward.
・
LTI-1200E
Inner door Left side
→
Right side
（
1
）
Remove all the screws that fixes the hinge of the inner
door.
LTI-1200E has 2 inner doors and 2 hinges are attached to
each door.
※
Let someone hold the inner door so that it won't fall down.
Attach removed screws to the bath that fixes the hinge.
（
2
）
Remove screws on the other side of the bath and turn the
inner door 180 and fix the door with removed screws (Set
the top of the removed inner door at the bottom and the
bottom at the top) .
※
Let someone hold the door until you attach 2 or 3 screws.
（
3
）
Set the other inner door by performing the same procedure.
※
Make sure that inner door does not hit the packing of the
bath. If it does, loosen the screw on the hinge and fix the
door again with raising or lowering the door a little bit.
8-3
Changing the opening side of inner door
※
Make sure that screws are attached to the
hinge tightly.
Magnet catch
Cover
（1）
（2）（3）
（4）
（1）
（2）
