SMX System MultiMatrix Switcher • SMX Control Software
71
•
Virtualize...
— Select this option to view and set up to 10 virtual planes. Select a
Virtual Plane
check box then select the desired
Physical Planes
check boxes.
Select
Take
. New tabs for the virtual planes (planes 1 and 5 in the example below)
appear on the inputs page. This recreates configurations from current boards and
configurations onto virtual planes.
•
Name Presets
— Select this to assign or edit preset names.
Audio-input-Config
NOTE:
This menu title is grayed-out until an audio plane is selected.
Upon selection of this menu, the Configure Audio Options window opens.
•
Configure Audio Options
— Sets the dB gain per audio input.
Click on the applicable
Changes
radio buttons to have the changes either immediate or
verifiable.
•
Verify
(default setting) allows accepting the changes via a
Take
button.
•
Immediate
removes the
Take
button from the window and all changes are made
immediately.
In the window, click on the up or down arrow for the an input until you reach the
desired gain value (range is -18 to 24 dB, default 0 dB), then click
Take
. The dB value
is black for current values, but turns red when changes are pending or green when the
pending change is returned to its original value. Click
Take
to confirm pending changes.
If you desire default values (0 dB), click
Use Defaults
.
