Extron electronics MultiMatrix Switcher User Manual Download Page 12 | Manualshive

Page: 12 / 137

background image

SMX MD System MultiMatrix Switcher • Installation

66

SMX System asdfasMultiMatrix Switcher • Installation

6

Installation and

Cabling

This section describes how to mount the SMX frame, install the I/O boards, and connect
cables to the SMX device. Topics in this section include:

•

UL Safety Requirements

•

Rear Panel Features and Connections

•

SMX Frame and I/O Board Installation

•

Wiring the Audio Connectors

UL Safety Requirements

The requirements listed below pertain to the safe installation and operation of this SMX.
Important safety instructions:

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with a dry cloth.

7.

Do not block any ventilation openings. Install in accordance with the manufacturer
instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produces heat.

9.

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third plug are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11.

Only use attachments/accessories specified by the manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13.

Unplug this apparatus during lightning storms or when unused for long periods of time.

14.

Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.

«
...
10
11
12
13
14
...
»

Summary of Contents for MultiMatrix Switcher










































































































































Reviews:

No comments

Related manuals for MultiMatrix Switcher

Brand: Keithley Pages: 66

Brand: C&H Technologies Pages: 1

Brand: D-Box Pages: 31

Brand: Qlogic Pages: 4

Brand: LIVOLO Pages: 14

Brand: Open Mesh Pages: 2

Brand: TRENDnet Pages: 12

SwitchMan USB-Combo SW2

Brand: Raritan Pages: 2

Brand: Ruby Tech Pages: 2

Brand: F&F Pages: 10

SmartSTACK ETHERNET ELS10-27

Brand: Cabletron Systems Pages: 126

Instant On 1930 Series

Brand: Aruba Pages: 8

Brand: Stahl Pages: 29

Brand: 3Com Pages: 62

IES2016-16T Series

Brand: 3onedata Pages: 3

Brand: National Instruments Pages: 8

Brand: Byte Delight Pages: 12

Brand: odot Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands