Extron electronics MultiMatrix Switcher, User Manual

Page: 48 / 137

SMX System MultiMatrix Switcher • SIS Configuration and Control 42
Command/Response Table for SIS Commands
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Output Switching by Plane
NOTES: •
The
&
tie command for RGBHV and the
%
tie command for video can be used interchangeably.
•
The ! tie command can be used for switching both video signals and audio signals with the same plane
address.
•
The
&
tie command for RGB and the
%
tie command for video can be used interchangeably.
•
The
&
read tie command for RGB and the
%
read tie command for video can be used interchangeably.
•
Commands can be entered back-to-back in a string with no spaces.
For example:
1*1*1&001*002&001*003*003&001
...
The SMX supports 1-, 2-, and 3-digit numeric entries (
1*1!
,
01*02*02&
, or
001*003*003%
).
Tie input to an output
(RGBHV)
X2@
*
X@
*
X#
& X2@
Out
X# •
In
X@ •
RGB
]
Tie input
X@
to output
X#
on plane
X2@
for RGB signals.
Tie input to an output (Video)
X2@
*
X@
*
X#
%
X2@
Out
X# •
In
X@ •
Vid
]
T
ie input
X@
to output
X#
on plane
X2@
for Video signals.
Tie input to an output (Audio)
X2@
*
X@
*
X#
$
X2@
Out
X#
•
In
X@
•
Aud
]
Tie input
X@
to output
X#
on plane
X2@
for audio signals.
Tie input to an output (All)
X2@
*
X@
*
X#
!
X2@
Out
X# •
In
X@ •
All
]
Tie input
X@
to output
X#
on plane
X2@
for all signals.
Tie input to all (RGBHV)
X2@
*
X@
* &
X2@
In
X@ •
RGB
]
Tie input
X@
to all outputs on plane
X2@
for RGB signals.
Tie input to all (video) X2@
*
X@
* %
X2@
In
X@ •
Vid
]
Tie input
X@
to all outputs on plane
X2@
for video signals.
Tie input to all (audio)
X2@
*
X@
* $
X2@
In
X@ •
Aud
]
Tie input
X@
to all outputs on plane
X2@
for audio signals.
Tie input to all
(audio and video)
X2@
*
X@
* !
X2@
In
X@ •
All
]
Tie input
X@
to all outputs on plane
X2@
all signals.
Quick Multiple Tie
Make multiple ties
E
+Q
X2@
*
X@
*
X#
!
...
X2@
*
X@
*
X#
$
}
Qik
]
Make multiple ties with one command
entry.
Example:
E
+Q01*3*4!01*3
...
*5%01*3*6$
}
Qik
]
Tie plane 01 input 3 audio and video
signals to outputs 4 (audio and video),
5 (video only), and 6 (audio only).
NOTE:
This command activates all I/O switches simultaneously.
NOTES:
X@
= Input number
01
-
<
maximum number of inputs
>
00 = untied
X#
= Output number
01
-
<
maximum number of outputs
>
X2@
= Plane number
00
-
15
= plane address
90 - 99
= virtual plane