Extron electronics MultiMatrix Switcher User Manual Download Page 124

Page: 124 / 137

Video input — SMX 44/48/84/88 DVI

Number/signal type ........................

4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)

Connectors ....................................

4 or 8 female DVI-I

Equalization

................................... Automatic

Input cable length ..........................

>100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

NOTE:

The transmission distance varies depending on the signal resolution and on the type of cable, graphics card,

and display used in the system.

Video output — SMX 44/48/84/88 DVI

Number/signal type ........................

4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)

Connectors ....................................

4 or 8 female DVI-I

Re-clocking .................................... Automatic
Peripheral device power ................. 250 mA per output

Video — SMX 44/48/84/88 DVI PRO

NOTE:

*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.

Routing

SMX 44 DVI PRO

..................... 4 x 4 matrix

SMX 48 DVI PRO

..................... 4 x 8 matrix

SMX 84 DVI PRO

..................... 8 x 4 matrix

SMX 88 DVI PRO

..................... 8 x 8 matrix

Gain

...............................................

Unity

Resolution range ............................

Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI

standard) @ 60 Hz

Signal type .....................................

Single-link DVI digital video signals are supported.

Digital video ............................

RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component

video (HDMI), actively buffered (supports all single link DVI and HDMI (if using
an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz

computer video)

NOTE:

These SMX DVI PRO Series boards

are

compatible with HDMI 1.3.

Digital audio ............................

Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the

RGB and Y, Cr, Cb lines, actively buffered.

Consumer Electronics Control (CEC)

Not supported

EDID and DDC

.........................

Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC)

data using DVI and HDMI standards. EDID and DDC signals are actively buffered.

HDCP

......................................

Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and

HDMI 1.3 standards

HPD

.........................................

Supports hot plug detection (HPD) of display as a pass-through signal.

Maximum data rate ........................

6.75 Gbps (2.25 Gbps per color)

Maximum pixel clock ......................

225 MHz

Standards .......................................

DVI 1.0, HDMI 1.3

Switching speed ............................. 200 ns, max.

Video input — SMX 44/48/84/88 DVI PRO

Number/signal type ........................

4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)

Connectors ....................................

4 or 8 female DVI-I (digital only)

Equalization

................................... Automatic

Input cable length ..........................

>100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color

NOTE:

The transmission distance varies depending on the signal resolution and on the type of cable, graphics card,

and display used in the system.

SMX System MultiMatrix Switcher • Reference Information

118

Summary of Contents for MultiMatrix Switcher










































































































































Search results

Summary of Contents for MultiMatrix Switcher

Reviews:

Related manuals for MultiMatrix Switcher

Brands by name

Popular brands

Extron electronics MultiMatrix Switcher, User Manual

Search results

Summary of Contents for MultiMatrix Switcher

Reviews:

Related manuals for MultiMatrix Switcher

Brands by name

Popular brands