Extron electronics MultiMatrix Switcher User Manual Download Page 74

Page: 74 / 137

SMX System MultiMatrix Switcher • SMX Control Software

•

Update Firmware...

— Select this option to update the SMX with the latest firmware.

To download the latest firmware version from the Extron website (

www.extron.com

On the Extron web page, select the

Download

tab.

Click the

Firmware

link on the left sidebar menu.

Click on “

,” scroll to

SMX Multi Matrix switcher,

and then click

Download

Fill in the required information, then click

Download

product

name_firmware

version

.exe.

In the File Download - Security Warning window, click

Save

In the Save As window, browse to the folder where you want to save the firmware
file, and click

Save

. The firmware installation file (*.S19) is saved on your hard drive.

To upload the firmware to the SMX:

Select

Update Firmware

and browse to the folder where the downloaded

firmware file (*.S19) was saved.

Select the applicable file and click

Open

. The file is uploaded.

When the SMX unit has restarted, check that all the previous ties and settings have
been restored and restart any control programs (for example, DataViewer, SMX

Control Program, web pages) that were previously open.

•

IP Options

— Select this to view and change the IP settings, Date/Time settings,

and Administrator/User access names and passwords for the SMX, E-mail addresses

and notification settings can also be changed.

Summary of Contents for MultiMatrix Switcher










































































































































Search results

Summary of Contents for MultiMatrix Switcher

Reviews:

Related manuals for MultiMatrix Switcher

Brands by name

Popular brands

Extron electronics MultiMatrix Switcher, User Manual

Search results

Summary of Contents for MultiMatrix Switcher

Reviews:

Related manuals for MultiMatrix Switcher

Brands by name

Popular brands