4-17
MPX 866 A Media Presentation Matrix Switcher • SIS Programming and Control
PRELIMINAR
Y
Command/Response table for IP SIS commands
Symbol defi nitions
X2!
= Web page priority
0 = internal
1 = user
X2@
= Matrix name
(Up to 240 characters)
N
The following characters are invalid in the name: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : \ | and ?.
X2#
= Default name
Factory default name (model name + last 3 pairs of MAC address)
X2$
= Time and date (set)
In the format: MM/DD/YY•HH:MM:SS
where
:
MM = month: 01 (January) through 12 (December)
DD = day: 01 through 31
YY = year: 00 through 99
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
X2%
= Time and date (read)
In the format: Day,•DD•Mmm•YYYY•HH:MM:SS
where
Day = weekday: Mon through Sun
DD = day: 01 through 31
Mmm = month: Jan through Dec
YYYY = year: 2000 through 2099
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
X2^
= GMT offset
-12.0 t14.0 (hours and minutes removed from GMT)
X2&
= Daylight Savings Time
0 = Daylight Savings Time off/ignore
1 = Daylight Savings Time on (northern hemisphere)
2 = Daylight Savings Time on (Europe)
3 = Daylight Savings Time on (Brazil)
X2*
= IP address
###-###-###-###
X2(
= Hardware (MAC) address
##-##-##-##-##-##
X3)
= Number of open connections
0 - 255
X3!
= Password
12 alphanumeric characters
N
The following characters are invalid in passwords: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : \ | and ?.
X3@
= DHCP
0 = off, 1 = on
X3#
= Port #
01 = rear panel RS-232 Primary port
02 = rear panel RS-232 Secondary port/front panel Cofi guration port
N
The rear panel RS-232 Secondary port (
X3#
= 02) is active only if the front panel Confi guration port is not in use. If a front panel
confi guration connection is made, the rear panel RS-232 Secondary port becomes inactive and the front panel Confi guration port is active.
X3$
= Baud rate
9600, 19200, 38400, 115200
X3%
= Parity
O
dd,
e
ven,
n
one,
m
ark,
s
pace (only fi rst letter required)
X3^
= Data bits
7, 8
X3&
= Stop bits
1, 2
X3*
= Verbose mode
0 = Clear/none (default for Telnet connection
1 = Verbose mode (default for RS-232 connection)
2 = Tagged responses for queries
3 = Verbose mode and tagged for queries
N
If tagged responses is enabled, all read commands return the constant string and the value as the set command does (for example, the read
matrix name command,
E
CN
}
, returns IPN
•X2@]
).
X3(
= Security level
00 = Anonymous
10 = Extended security levels 1 through 10
11 = User
12
=
Administrator
X4)
= RAM status
0 = RAM dirty (needs saving to fl ash)
1 = RAM has been saved (ok to power off / reset)
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
