Extron electronics MPX 866 A User Manual Download Page 31

Page: 31 / 148

3-5

MPX 866 A Media Presentation Matrix Switcher • Operation

PRELIMINAR

View (

) button and LED —

The View (

) button and LED have two primary

functions (•) and fi ve secondary (

❏

) functions:

•

Select

View-Only

mode, which displays the current confi guration.

See

Viewing a confi guration

on page 3-17.

View-only mode also provides a way to mute and unmute the outputs. See

Muting and unmuting video and/or audio outputs

on page 3-20.

•

Indicate that

View-Only

mode is active.

❏

Decrease the audio level of the selected input. See

Viewing and adjusting

the input audio level

on page 3-28.

❏

Decrease the volume of the selected output. See

Viewing and adjusting the

output volume

on page 3-32.

❏

With the Enter, Preset, and Esc buttons, select

Serial Port Confi guration

mode. See

Selecting the RS-232 Primary port’s baud rate

on page 3-37.

❏

Select 38400 baud for the RS-232 Primary port in

Serial Port Confi guration

mode. See

Selecting the RS-232 Primary port’s baud rate

on page 3-37.

❏

Indicate that the RS-232 Primary port is set to 38400 baud in

Serial Port

Confi guration

mode. See

Selecting the RS-232 Primary port’s baud rate

page 3-37.

Esc (

) button and LED —

The Esc (

) button and LED have two primary

functions (•) and fi ve secondary (

❏

) functions:

•

Cancel operations or selections in progress and reset the front panel
button indicators.

The Esc (

) button does

not

reset the current confi guration, the Video button

and Audio button selection, any presets, or any audio gain or attenuation or
volume settings.

•

The Esc LED fl ashes once to indicate that the escape function has been
activated.

❏

Increase the audio level of the selected input. See

Viewing and adjusting

the input audio level

on page 3-28.

❏

Increase the volume of the selected output. See

Viewing and adjusting the

output volume

on page 3-32.

❏

With the Enter, Preset, and View buttons, select

Serial Port Confi guration

mode. See

Selecting the RS-232 Primary port’s baud rate

on page 3-37.

❏

Select 115200 baud for the RS-232 Primary port in

Serial Port Confi guration

mode. See

Selecting the RS-232 Primary port’s baud rate

on page 3-37.

❏

Indicate that the RS-232 Primary port is set to 115200 baud in

Serial Port

Confi guration

mode. See

Selecting the RS-232 Primary port’s baud rate

page 3-37.

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201
Fax 07131 911203

[email protected]

Summary of Contents for MPX 866 A





















































































































































Search results

Summary of Contents for MPX 866 A

Reviews:

Related manuals for MPX 866 A

Brands by name

Popular brands

Extron electronics MPX 866 A, User Manual

Search results

Summary of Contents for MPX 866 A

Reviews:

Related manuals for MPX 866 A

Brands by name

Popular brands