Operation, cont’d
MPX 866 A Media Presentation Matrix Switcher • Operation
3-40
PRELIMINAR
Y
Performing a hard reset
The hard reset function restores the switcher to the base fi rmware that it shipped
with. After a hard reset, events do not automatically start, but user settings and
fi les are restored. Perform a hard reset as follows:
N
The hard reset restores the factory-installed fi rmware. The switcher reverts to
that factory fi rmware the next time power is cycled off and on
unless
a fi rmware
update is performed before the power cycle.
1.
If necessary, turn off power to the switcher.
2.
Press and
hold
the Reset button on the rear panel
while
you apply AC power
to the switcher (fi gure 3-68).
Power
RESET
LAN
CT
LINK
RESET
LAN
CT
LINK
Press and
hold
the Reset button while you apply power to the switcher.
The switcher flashes the front panel LEDs
and then turns them off.
Continue to hold the Reset button until all input and output LEDs return
to unlit and the Video and Audio LEDs light.
Release the Reset button.
Figure 3-68 — Hard reset
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
