SIS
™
Programming and Control, cont’d
MPX 866 A Media Presentation Matrix Switcher • SIS Programming and Control
4-8
PRELIMINAR
Y
Command/response table for SIS commands
Command
ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Create ties
N
• Video ties cannot be made between the computer video group and the low resolution video group.
•
Audio ties can only be made to the computer/audio output subgroup (outputs 1 through 6).
•
Video and audio ties between the low resolution video input subgroup and the low resolution video outputs subgroup
are
always
made with the audio broken away. In such an operation, the switcher automatically ties the audio to an
output in the computer/audio outputs subgroup (outputs 1 through 6) as follows:
If the video is tied to output 7, the audio is tied to output 1.
If the video is tied to output 8, the audio is tied to output 2.
If the video is tied to output 9, the audio is tied to output 3.
If the video is tied to output 10, the audio is tied to output 4.
If the video is tied to output 11, the audio is tied to output 5.
If the video is tied to output 12, the audio is tied to output 6.
•
Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*2&02*04%4*6$.
•
The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
•
The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 003*003).
Tie input
X@
to output
X#
,
video (V) and audio (A)
X@
*
X#
!
Out
X#
•In
X@
•All
]
or
Qik
]
Tie input
X@
‘s video and
audio to output
X#
.
N
The response is
Out
X#
•In
X@
•All
]
when the video and audio ties are made between the computer video input group
and the computer/audio output group, because audio always follows the video.
The response is
Qik
]
when video and audio ties are made between the low resolution video input group and the low
resolution video output group, because audio is automatically broken away to the computer/audio group.
Example: (computer video
group tie)
1*3!
Out03•In01•All
]
Tie input 1 video and audio
to output 3.
Example: (low resolution
video group tie)
9*9!
Qik
]
Tie input 9 video to output 9.
The switcher automatically
breaks the audio away to
output 3.
Tie input
X@
to output
X#
,
computer video only
X@
*
X#
&
Out
X#
•In
X@
•RGB
]
Video breakaway.
Example (see Note below):
5*4&
Out04•In05•RGB
]
Tie input 5 RGB to output 4.
Tie input
X@
to output
X#
,
video only
X@
*
X#
%
Out
X#
•In
X@
•Vid
]
Video breakaway.
Example (see Note below):
9*7%
Out07•In09•Vid
]
Tie input 9 video to output 7.
N
The & tie command for RGB and the % tie command for video can be used interchangeably on the matrix switcher for
ties within the same group.
Tie input
X@
to output
X#
,
audio only
X@
*
X#
$
Out
X#
•In
X@
•Aud
]
Audio breakaway.
N
Audio-only ties can only be made to outputs in the computer/audio output subgroup (outputs 1 through 6).
The switcher responds with an E13 error if you try to make an audio-only tie to outputs 7 through 12.
Example:
12*4$
Out04
•
In12
•
Aud
]
Tie input 12 audio to output 4.
Quick multiple tie
E
+Q
X@
*
X#
!...
X@
*
X#
$
}
Qik
]
N
All video and audio group rules apply to the quick multiple tie command.
Example:
E
+Q3*4!11*12%13*6$
}
Qik
]
Tie input 3 video and audio
to output 4, tie input 11
video to output 12, and tie
input 13 audio to output 6.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
