Operation, cont’d
MPX 866 A Media Presentation Matrix Switcher • Operation
3-18
PRELIMINAR
Y
Example 5: Viewing video and audio, audio only, and video only ties
The following example shows the viewing of the video and audio, audio-only,
and video-only ties in the current confi guration. The steps show the front panel
indications that result from your action.
N
This example assumes that you have performed example 1, example 2, and
example 3.
1.
Press and release the Esc button (fi gure 3-27).
CONTROL
ENTER
PRESET
VIEW
ESC
Press the Esc button to clear all selections.
The LED blinks once.
= Blink once
1
1
Figure 3-27 — Clear all selections
2.
Press and release the View button to enter
View-Only
mode. The View button
lights red.
3.
To select both video and audio for viewing, if necessary, press and release the
Video button and the Audio button (fi gure 3-28).
VIDEO AUDIO
I/O
1
2
3
4
5
6
COMPUTER/AUDIO OUTPUTS
Until you select an input, the buttons for all untied outputs light.
Press the Audio button
to toggle on and off.
The LED lights or
blinks when selected.
In this example, the Audio LED blinks to indicate audio
breakaway (assuming you have performed example 1, 2, and 3).
Press the Video button to
toggle on and off.
The LED lights when
selected.
Figure 3-28 — Select video and audio
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
