Extron electronics DXP DVI, User Manual

Page: 89 / 137

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Matrix Software 83
Edit the
Administrator Password
field as follows:
1. Click in the
Administrator Password
field. The graphic cursor becomes a text
cursor.
2. Make any desired changes to the case-sensitive password.
3.
Press the <Tab> key on the keyboard or click in another field to exit the
Administrator Password
field.
4. Click the
Take
button for the password change to take effect.
Setting the user password
The
User Password
field displays the password required to log on to the DXP switcher via
the Ethernet port as a user, without all administrator rights and privileges. Passwords are
case-sensitive and are limited to 12 uppercase and lowercase alphanumeric characters.
While you are logged on as a user, this field is masked with asterisks (
************
) as a
security measure.
NOTES: • An administrator password must be created before a user password can be
created.
• The following characters are invalid or not recommended in passwords:
+ ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \ ?
and
{space}
.
Edit the
User Password
field as follows:
1.
Click in the
User Password
field. The graphic cursor becomes a text cursor.
2. Make any desired changes to the case-sensitive user password.
3. Press the <Tab> key on the keyboard or click in another field to exit the
User
Password
field.
4. Click the
Take
button for the password change to take effect.
Setting the mail server IP address
The
Mail Server IP Address
field displays the IP address of the mail server that handles
the e-mail for the facility in which the DXP switcher is installed (see “
Setting the IP
address
” on page
80
for the valid address format).
Edit this field as follows:
1. Click in the
Mail Server IP Address
field. The graphic cursor becomes a text cursor.
2. Make any desired changes to the mail server IP address.
3.
Press the <Tab> key on the keyboard or click in another field to exit the mail server IP
address field.
4. Click the
Take
button for the address change to take effect.
Setting the mail server domain name
The
Mail Server Domain Name
field displays the domain name that the DXP
switcher uses to log on to the e-mail server. Standard domain conventions (such as
xxxxx
@
xxx
.com) apply.
NOTE: • The following characters are invalid or not recommended in a domain name:
+ ~ , = ` [ ] { } < > ‘ ’ “ ” ; : | \ ?
and
{space}
.
• The
@
character is acceptable only as the lead-in to the domain name (such
as
@folklore.net
).