DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control
54
SIS Commands for DXP
Symbol Definitions for DXP
]
= Carriage return and line feed
}
or
¦
= Carriage return (no line feed)
•
= Space
E
or
W
= <Escape> key
NOTE:
Input and output numbers in commands may be entered as either one-digit, two-
digit, or three-digit numbers. All input and output numbers are reported as two-digit
numbers in the response.
X!
= Input number
1
– maximum number of inputs for your model
X@
= Input number (for ties)
0
– maximum number of inputs for your model
(
0
= untied)
X#
= Output number
1
– maximum number of outputs for your model
X$
= Lock mode, power,
0
= lock mode 0, not OK, or unmuted
supply or individual
1
= lock mode 1, OK, or muted
mute status
2
= lock mode 2
X%
= Group number (for I/O
1
through
4
groups
grouping)
0
= no group
X^
= Room number (for room
10
maximum. Each room can have up to 10 room
presets)
presets
(
X*
) assigned.
NOTE:
A room is a subset of operator-selected outputs that relate to each other. The DXP
switchers support up to 10 rooms, each of which can consist of from 1 to 16 outputs.
X&
= Global preset number
00
–
32
(
00
= current configuration)
X*
= Room preset number
00
– current ties for the room in view mode, 10
maximum
NOTE:
A room preset is a stored configuration with all of the outputs assigned to a single
room. When a room preset is retrieved from memory, it becomes the current
configuration.
X(
= All video and audio mute
0
= no signals muted
status
1
= video muted
2
= audio muted
3
= video and audio muted
X1)
= HDCP status
0
= No input or output is connected.
1
= Input or output is connected and is
not
HDCP
compliant.
2
= Input or output is connected and is HDCP
compliant.
X1!
= Connection status
0
= no input connected
1
= input connected
X1#
= Name
12 characters maximum for input, output, and global
preset
names
11 characters maximum for room names
Upper- and lowercase letters are valid.
NOTE:
The following characters are invalid or not recommended in the name:
{space}
~ , @ =
`
[ ] { } < > ‘ ’ “ ” ; : | \ +
and
?
X1$
= Total inputs
Total number of inputs for this switcher
X1%
= Total outputs
Total number of outputs for this switcher
