Extron electronics DXP DVI, User Manual

Page: 22 / 137

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Operation 16
Secondary functions (
•
):
•
In I/O grouping mode, selects group 1 (see “ I/O Grouping ” on page 32 ).
•
In I/O grouping mode, indicates that group 1 is selected.
•
With the Preset, View
<
, and Esc
>
buttons, places the switcher in serial port
configuration mode (see “
Selecting the RS-232/RS-422 Protocol and Baud
Rate (Rear Panel)
” on page
44
).
•
Selects 9600 baud for the Remote RS232/RS422 and the RS-232 Config ports
in serial port configuration mode.
•
Indicates that the Remote RS232/RS422 and the RS-232 Config ports are set to
9600 baud in serial port configuration mode.
e
Preset button — The Preset button does the following:
Primary functions (
❏
):
❏
Places the switcher in preset saving mode to save a configuration as a preset,
and in preset recalling mode to activate a previously-defined preset.
❏
Blinks when the DXP is in preset saving mode and lights steadily when the
switcher is in preset recalling mode.
Secondary functions (
•
):
•
In I/O grouping mode, selects group 2.
•
In I/O grouping mode, indicates that group 2 is selected.
•
With the Enter, View < , and Esc
>
buttons, places the switcher in serial port
configuration mode.
•
Selects 19200 baud for the Remote RS232/RS422 and the RS-232 Config ports
in serial port configuration mode.
•
Indicates that the Remote RS232/RS422 and the RS-232 Config ports are set to
19200 baud in serial port configuration mode.
f
View < button — The View
<
button does the following:
Primary functions (
❏
):
❏
Places the switcher in view-only mode to display the current configuration.
NOTE: View-only mode also provides a way to mute and unmute outputs
(see “ Muting and Unmuting Video and Audio Outputs ” on
page 36 ).
❏
Indicates that the DXP is in view-only mode.
Secondary functions (
•
):
•
In I/O grouping mode, selects group 3.
•
In I/O grouping mode, indicates that group 3 is selected.
•
With the Enter, Preset, and Esc
>
buttons, places the switcher in serial port
configuration mode.
•
Selects 38400 baud for the Remote RS232/RS422 and the RS-232 Config ports
in serial port configuration mode.
•
Indicates that the Remote RS232/RS422 and the RS-232 Config ports are set to
38400 baud in serial port configuration mode.