Extron electronics 6400s, User Manual

Page: 142 / 148

Fiber Matrix 6400 Switcher • Specifications, Part Numbers, Accessories
B-2
Specifications, Part Numbers, Accessories
Specifications
N The Fiber Matrix 6400 fiber optic I/O boards are class 1 laser products. They meet the safety
regulations of IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.
Optical specifications
Number/type ................................ 8 single mode or 8 multimode fiber optic inputs and outputs per I/O card
N Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is
required to transmit return data for bidirectional control/communication.
Connectors ..................................... 8 LC connectors per I/O card
Operating distance ........................ 30 km (18.75 miles) with singlemode (SM) cables with a FOX 500 DA6 SM or
FOX 500 TX/RX SM
0.15 km (492’) with multimode (MM) cables with a FOX 500 DA6 MM or
FOX 500 TX/RX MM
N Operating distance is approximate. These are typical distances. The maximum distance may
be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth,
connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength........... 850 nm for multimode (MM), 1310 nm for single mode (SM)
Transmission power
Singlemode ......................... -5 dBm, typical
Multimode .......................... -5 dBm, typical
Maximum receiver sensitivity
Singlemode ......................... -18 dBm, typical
Multimode .......................... -12 dBm, typical
Optical loss budget
Singlemode ......................... 13 dB, maximum
Multimode .......................... 7 dB, maximum
Maximum channel data rate ........ 4.25 Gbps
Video
Routing ........................................... 8 x 8 up to 64 x 64 unidirectional (TX) matrix or
4 x 4 up to 32 x 32 bidirectional (TX/RX) matrix
Gain ................................................. Unity
Pixel data bit depth ....................... 8 bits per channel, 3 channels (R, G, B)
Maximum resolution .................... 1600x1200 @ 60 Hz, digitized pixel for pixel; higher resolutions up to
2048x1120, undersampled
Video/audio input
Number/signal type ..................... 8 to 64 fiber optic signals
Connectors ..................................... 8 LC connectors per I/O card
N
Input comes from an Extron FOX 500 TX transmitter, FOX 500 DA6, or FOX 500 DVI
transmitter.
Video/audio output
Number/signal type ..................... 8 to 64 fiber optic signals
Connectors ..................................... 8 LC connectors per I/O card
N
Output connects to an Extron FOX 500 RX receiver or FOX 500 DVI receiver.
Specs file: Fiber_Matrix_6400_D5_061008.indd,
adapted for the first Note to read
“
The Fiber Matrix 6400 fiber optic I/O boards
“