Extron electronics 6400s, User Manual

Page: 50 / 148

Operation, cont’d
Fiber Matrix 6400 Switcher • Operation
3-24
Example 9: Muting and unmuting an output
In the following example, several switcher outputs are muted and unmuted. The
steps show the front panel indications that result from your action.
1 . Clear all selections : Press and release the Esc button.
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
2 . Select View-only mode : Press and release the View button to enter View-only
mode. The View button lights red.
C O N T R O L
PRESET ENTER
ESC VIEW
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
Until you select an input, only the buttons for untied outputs light.
Press the View button.
The button lights.
3 . Mute the outputs : One at a time , press and hold the Output 3 button and
then the Output 4 button for approximately 2 seconds until each button
begins to blink. The output 3 and output 4 signals are muted.
3
4
3
4
The button blinks
to indicate that the
outputs are muted.
The button blinks
to indicate that the
outputs are muted.
Mute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button.