Operation, cont’d
Fiber Matrix 6400 Switcher • Operation
3-4
b
Output buttons —
The output buttons have two primary functions (•) and
four secondary functions (
❏
):
• Select output(s).
• Identify the selected output(s).
❏
(Output 1 only)
With the Input 1 button, select
I/O Group
mode.
See “I/O grouping” on page 3-17.
❏
Select a preset. See “Using presets” on page 3-21.
❏
Mute the output. See “Muting and unmuting outputs” on page 3-23.
❏
Output 63 —
Select the RS-232 protocol for the RS-232/RS-422 port in
Serial Port Selection and Configuration
mode and indicate its selection.
See “Selecting the rear panel Remote port protocol and baud rate”
on
page 3-27.
❏
Output 64 —
Select the RS-422 protocol for the RS-232/RS-422 port in
Serial Port Selection and Configuration
mode and indicate its selection.
See “Selecting the rear panel Remote port protocol and baud rate”
on
page 3-27.
Control buttons
Primary functions
Action:
Save changes
Select
Preset
mode
Select
View
mode
Cancel/escape
Indication:
Blink
: save needed
Blink
: Save preset
Lit
: Recall preset
View
mode selected
Flashes once
ENTER
PRESET
VIEW
ESC
Secondary functions
I/O Grouping Action/
indication:
Select group 1.
Select group 2.
Select group 3.
Select group 4.
Action 1:
Select
Configuration
mode
Action 2/
indication:
Select 9600 baud.
Blink
: selected
Select 19200 baud.
Blink
: selected
Select 38400 baud.
Blink
: selected
Select 115200 baud.
Blink
: selected
Action:
With Esc, toggle
front panel lock
on and off.
Flash twice to indicated the front panel has
been locked or unlocked.
With Enter, toggle
front panel lock
on and off.
c
Enter button —
The Enter button has three primary functions (•) and four
secondary functions (
❏
):
• Save changes that you make on the front panel. To create a simple
configuration:
Press the desired input button (
a
).
Press the desired output button(s) (
b
).
Press the Enter button.
• Indicate that a potential tie has been created but not saved.
• Indicate that a global preset has been selected to be saved or recalled but
that the preset action has not been accomplished.
Summary of Contents for 6400s
