Operation, cont’d
Fiber Matrix 6400 Switcher • Operation
3-8
Definitions
The following terms, which apply to Extron matrix switchers, are used throughout
this manual:
Tie —
An input-to-output connection.
Set of ties —
An input
tied
to two or more outputs. (An output can never be tied
to more than one input.)
Configuration —
One or more
ties
or one or more
sets of ties
.
Current configuration —
The
configuration
that is currently active in the
switcher (also called
configuration 0
)
Global memory preset —
A
configuration
that has been stored. Up to 64
global
memory presets
can be stored in memory. When a
preset
is retrieved from
memory, it becomes the
current configuration
. Presets can be saved and
recalled from the front panel and any of the serial or LAN ports. For front
panel operations, preset locations are assigned to the input buttons.
Room —
A subset of outputs that are logically related to each other, as
determined by the operator. The switchers support up to 10
rooms
, each of
which can consist of from 1 to 64 outputs.
Room memory preset —
A
configuration
consisting of outputs in a single
room
that has been stored. When a
room preset
is retrieved from memory, it
becomes the
current configuration
.
Power
Apply power by connecting one or both power cords (Primary and Redundant)
to the AC source(s). The switcher performs a self-test that flashes the front panel
button indicators red, green, red, and amber and then turns them either off or to
background illumination. An error-free power up self-test sequence leaves all
control buttons either unlit or showing background illumination.
The current configuration and all presets are saved in non-volatile memory. When
power is applied, the most recent configuration is retrieved. The previous presets
remain intact.
If an error occurs during the self-test, the switcher locks up. If your switcher locks
up on power-up, call the Extron S
3
Sales & Technical Support Hotline. See the rear
cover of this manual for the phone number in your region of the world.
Summary of Contents for 6400s
