Extron electronics 6400s, User Manual

Page: 41 / 148

3-15
Fiber Matrix 6400 Switcher • Operation
3 . Select the desired input or output(s) whose ties you wish to view by pressing
the input and output buttons.
N • When you enter View-only mode, the output buttons light for all outputs
without ties. Likewise, when you press an output button for which there are
no ties, the output buttons light for all outputs without ties.
• To see all ties of the current configuration, press and release each input and
output button, one at a time.
• After 30 seconds of front panel inactivity,
View-only
mode automatically
ends.
Example 4: Viewing ties
In the following example, the ties in the current configuration are viewed. The
steps show the front panel indications that result from your action.
N
This example assumes that you have performed example 1, example 2, and
example 3.
1 . Clear all selections : Press and release the Esc button.
C O N T R O L
PRESET ENTER
ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
2 . Select View-only mode : Press and release the View button to enter View-only
mode. The View button lights amber.
C O N T R O L
PRESET ENTER ESC VIEW
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
Until you select an input, only the buttons for untied outputs light.
Press the View button.
The button lights.