Extron electronics 6400s, User Manual

Page: 123 / 148

6-11
Fiber Matrix 6400 Switcher • HTML Operation
1 . Visit the Extron Web site, www.extron.com , select the Fiber Matrix 6400
product category, select the latest
firmware installation package (*.exe file) for
the switcher, and download the file
. Note the folder to which you save the
firmware file.
2 . Run the executable (*.exe) file to decompress the firmware file.
3 . Connect the PC to the Fiber Matrix switcher via the switcher’s LAN port.
4 . Access the Fiber Matrix switcher using HTML pages.
5 . Click the Configuration tab.
6 . Click the Firmware Upgrade link (figure 6-9).
6
10
7
9
This screen is shown for
example only.
For the Fiber Matrix 6400,
the firmware file selected and
shown is “Fiber Matrix 6400”.
NOTE
Figure 6-9 — Firmware upgrade
7 . Click the Browse button. A Choose Fi le window appears.
8 . Navigate to the folder where you saved the firmware upgrade file. Select the
file.
N
Valid firmware files must have the file extension “.S19”. Any other file
extension is not a firmware upgrade.
N
The original factory-installed firmware is permanently available on the
Fiber Matrix switcher. If the attempted firmware upload fails for any reason, the
switcher automatically reverts to the factory-installed firmware.
9 . Click the Open button.
10 . Click the
Upload
button. The firmware upload to the Fiber Matrix switcher
may take a few minutes.