48
For a detailed description of how to set up a test sequence, please refer to section
4.4 Setting
Up a Test.
For a detailed description of the screens and parameters that are associated with Test selection
softkeys on this screen please refer to section
4.4 Test Parameters.
4.2.2 Edit
From the Setup Tests screen, use the up, down arrow keys, and scroll the highlighted area to
the step you wish to edit. Press the “Edit” soft key. The Parameter-setting screen, for the
type of test that is in that location will now be displayed. The parameters for the test may
now be edited.
For a detailed description of the screens and parameters that are associated with the Edit
softkey on this screen please refer to section
4.4 Test Parameters.
4.2.3 Delete
From the Setup Tests screen, use the up, down arrow keys, and scroll the highlighted area to
the step you wish to delete. Pressing the “Delete” soft key will remove the step.
4.2.4 Prompt
The prompt function allows you to insert a short line of text in a step. The prompt will
appear on the screen before the step is initiated and remain on the screen until the TEST button
is pressed. After the TEST button is pressed, the Prompt will clear and the step will initialize.
Use the up, down arrow keys to scroll the highlighted area to the step where you would like to
insert the text prompt and press the “Prompt” soft key. The Prompt screen will now be
displayed. The Prompt screen will appear as follows: