29
Front Panel Controls (Continuing)
7.
Å
KEY
Key used to delete key-in data or recover data.
8. NUMERIC DATA ENTRY
Keys used to enter numeric data.
9. SOFT KEYS
Multifunction parameter selection keys. Keys used to select screens and change parameters.
10. TEST BUTTON
Momentary contact switch used to start tests. Press the green button to activate the test that
is set up in the test buffer shown on the display.
11. RESET BUTTON
Momentary contact switch used to reset the instrument. If a failure condition occurs during a
test, you will need to reset the system to shut off the alarm and signal the system that you are
aware of a failure condition. The reset button must be pressed before you can proceed to the
next test or change any of the set-up parameters. This switch also serves as an abort signal to
stop any test in progress controlled by the 7630.
1
2 3
4
5
8
9
10
11
6
7