41
left and right arrow keys select the field within the date, you want to edit. Using the numeric
keypad enter the new number. Once you begin typing a new number, the parameter will
blank and the cursor will begin blinking. This indicates that the parameter is being edited.
Once a parameter is edited, it is necessary to complete the edit either by pressing the ENTER
key to accept the new number or the EXIT key to escape from the edit and return to the
original number.
The Calibration Alert Warning screen appears as follows:
At the Calibration Alert Warning screen there are three options, “Show this screen again?”,
Password and OK. “Show this screen again?” is asking if you would like to continue seeing
the Calibration Alert Warning screen every time you power up the instrument. You may turn
this screen “OFF” by toggling to the word “No” using the soft key next to this parameter. If
the instrument is password protected you will need to enter the password in order to turn off
the “Show this screen again” parameter. Selecting the “Show this screen again” parameter
“OFF” will disable the Calibration Alert function. Pressing the OK soft key will exit the
Calibration Alert Warning screen and go to the standard introduction screen.
4.1.2.3 Calibration Alert On/Off
From the Cal. Alert setting screen, you may turn the Calibration Alert function ON and OFF
by pressing the “Cal. Alert” soft key. If the “Show this screen again?” function has been
turned “OFF” at the Calibration Alert Warning screen, this parameter will automatically be set
to “OFF”. Turning this parameter “ON” will activate the Cal Alert function and when the
date matches the Alert Date, the instrument will display the Calibration Alert warning screen
upon power up.
4.1.3 Hardware
From the System Setup screen, press the “Hardware” soft key. The Hardware setting screen
will now be displayed. From the Hardware setting screen, five different parameters may be
accessed: Alarm Volume, LCD Contrast, GPIB Address (Option GPIB Function) , and PLC
Remote. The Hardware setting screen will appear as follows: