EXFO FTB-8100 Series, User Manual

Page: 71 / 518

Creating and Starting a Test Case
SONET/SDH Application
59
Typical Test Cases
Creating an Electrical DS1 or DS3 Test Case in Dual
RX Mode
The following procedures describe the creation of an electrical DS1 or DS3
test case in
Dual RX
mode.
To create an Electrical DS1 or DS3 Test in Dual RX mode:
1.
Test configuration:
1a. Select the source
Clock
Mode that will be used
for the test. Refer to
Clock Configuration on
page 101 for more
information.
1b. Select
Dual RX
(DS1 or
DS3 signals) as the Test
Mode
. Refer to Test
Configuration on page 98 for more information.
The
Coupled
check box is automatically selected for Dual RX
mode meaning that the settings for both the TX and RX signals are
the same.