manualshive.com logo in svg

EXFO FTB-8100 Series, User Manual

Share
Download
EXFO FTB-8100 Series User Manual Download Page 27

Physical Interfaces and LEDs

SONET/SDH Application

15

Modules

FTB-8130/FTB-8130NG/FTB-8130NGE Module

SONET/SDH/OTN analyzer up to 11.1 Gbps. The 

FTB-8130NGE

 also offers 

10 Gbps Ethernet and up to 10x Fibre Channel; refer to the “Ethernet and 
Fibre Channel Application” user guide for more information. 
Next-Generation features are available on the FTB-400/500 platform only.

DS1/1.5M, E1/2M (RJ-48C port)

DS1/1.5M, E1/2M (Bantam port)

AUX DS1/E1/2MHz 
IN/OUT (Clock Sync.) or 
second port for DS1/DS3 
dual RX

E1/2M, E2/8M, E3/34M,

DS3/45M, STS-1e/STM-0e,

E4/140M, STS-3e/STM-1e

OC-192/STM-64/
OTU2/OTU1e/OTU2e/ 
OTU1f/OTU2f

OC-3/STM-1, OC-12/STM-4, 
OC-48/STM-16/OTU1

REF OUT (Clock reference for eye diagram) available 
with OC-192/STM-64/OTU2/OTU1e/OTU2e/OTU1f/OTU2f 
configuration

Ethernet ADD/DROP Gig-E optical

Ethernet ADD/DROP

10/100/1000M electrical

Summary of Contents for FTB-8100 Series







































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands