EXFO FTB-8100 Series, User Manual

Page: 163 / 518

OTN Tabs
SONET/SDH Application
151
ODU TCM TTI RX
Expected Message
³
SAPI
allows editing the expected Source Access point Identifier (TTI
bytes 1 to 15). Available when Enable TIM SAPI is enabled. The default
setting is
EXFO TCMi SAPI
. The TTI byte 0 is set to NULL (all 0’s).
³
DAPI allows editing the expected Destination Access point Identifier
(TTI bytes 17 to 31). Available when
Enable TIM DAPI
is enabled. The
default setting is EXFO TCMi DAPI . The TTI byte 16 is set to NULL (all
0’s).
³
Enable TIM
SAPI
allows editing the expected Source Access Point Identifier when
the SAPI check box is selected. Enables also the TCMi-TIM alarm
monitoring. The
SAPI
check box is cleared by default.
DAPI allows editing the expected Destination Access Point Identifier
when the
DAPI
check box is selected. Enables also the TCMi-TIM alarm
monitoring. The DAPI check box is cleared by default.
Note:
“i” is the level (1 to 6) of the selected TCM.