Ewellix CAMT20, Installation, Operation And Maintenance Manual

Page: 10 / 46

10
CAMT 20
10
Connection cable (CAMT <-> Control unit SCU;
SCU <-> Operating elements)
Description Plug Drawing-No Type Length
m
Connecting cable straight:
CAMT – SCU
DIN 8p – Molex 6p 777400-1000
2 x AWG16 &
4 x AWG24
1
Connecting cable straight:
CAMT – SCU
DIN 8p – Molex 6p
DIN 8p – open wire
777400-2300
2 x AWG16 &
4 x AWG24
2.3
Connecting cable coiled:
SCU – Hand switch
HD 15p 160600-1350 15 x AWG30 1.3/2.3
Connecting cable straight:
SCU – Foot switch
HD 15p 160632-2500 10 x AWG28 2.5
Connecting cable coiled:
SCU – Foot switch
HD 15p 160633-2500 10 x AWG28 1.2/2.5
Connecting cable straight:
SCU – Desk switch
HD 15p 160634-2500 10 x AWG28 2.5
Power cables (Main <-> Control unit SCU)
Description Plug Country Drawing-No Length Comment
m
Straight power cable Schuko Euro ZKA-160637-3500 3.5
Straight power cable SEV CH ZKA-160638-3500 3.5
Straight power cable UL/CSA (NEMA 5-15p) USA/CAN ZKA-160639-3500 3.5 SJT-cable
Straight power cable UL/Hospital grade
(NEMA 5-15p)
USA/CAN ZKA-160640-3500 3.5 SJT-cable
Straight power cable British plug UK ZKA-160609-3500 3.5
RF Communication Equipment
WARNING
Portable RF communications equipment
Portable RF communications equipment (including peripherals
such as antenna cables and external antennas) should be used
no closer than 30 cm (12 inch) to any part of CAMT, including
cable spacified by the manufacturer. Otherwise, degradation of
the performance of this equipment could result.
2.8.2 Technical description
Requirements applicable to all ME equipment
and ME systems
This chapter describes precautions to be taken to prevent
adverse events to the patent and operator due to electro-
magnetic disturbances.