25
4.0 Structure a n d fun ctio n
4.8.2 Optional features
Distance between front pivot and gear box
(offset “X”)
Defines the distance between the pivot point of the front at-
tachment to the front cover of the gear box. Depending to
the selected front attachment option the distance might
vary. The standard offset is defined to allow full motion angle
to the front attachment without having an intersection with
the front cover.
Other distance variations are also available as customization
with 1 mm steps.
Protection tube length
Defines the length of the protection tube. The two available
standard options are a short and a long. With the long tube
the lead screw is covered when it is completely retracted.
Short is the shortest possible length, without having an in-
tersection between the rear attachment and the gear box at
full motion angle.
Other tube length variations are also available as customiza-
tion with 10 mm steps.
Front and rear attachment
Several standard options are available. Details are described
in chapter 4.4 Attachment options (⮑ page 19).
Cable options
Available cable options are: With DIN-8 cable, in lengths of
1 m or 2.3 m and with flying leads termination, in length of
2.3 m.
Summary of Contents for CAMT20
Page 1: ...CATEGORY MAX 2 LINES INSTALLATION OPERATION AND MAINTENANCE MANUAL CAMT20 Linear actuator...
Page 2: ......
Page 45: ......
