EVS Synapse GFS100, Installation And Operation Manual

Page: 27 / 48

GPI_1 ~ GPI_5 In this card it is possible to make the 5 available GPI triggers part of a GPI pool
that can control the various functions in the card separately (all Xx_Ctrl items of
the menu). With these items you can select which pool the corresponding GPI is
part of and how it should trigger. You can also choose to not use the
corresponding GPI at all by setting it to Off. Possible settings are:
• GPI A : part of GPI-A pool, triggered once Take A is closed.
• GPI B : part of GPI-B pool, triggered once Take B is closed.
• GPI C : part of GPI-C pool, triggered once Take C is closed.
• Take A : part of GPI-A pool, used to trigger GPI A.
• Take B : part of GPI-B pool, used to trigger GPI B.
• Take C : part of GPI-C pool, used to trigger GPI C.
• GPI Prio A : part of GPI-A pool, working in a priority manner (highest closed
GPI of the pool is activated).
• GPI Prio B : part of GPI-B pool, working in a priority manner (highest closed
GPI of the pool is activated).
• GPI Prio C : part of GPI-C pool, working in a priority manner (highest closed
GPI of the pool is activated).
Please refer to "GPIs Explained" for a more elaborate explanation of the GPI
settings.
5.7. Network
Setting Description
IP_Conf0 With this setting you can either let the card obtain an IP address automatically via
DHCP, or assign an IP address manually.
By default this is set to DHCP.
mGW0 With IP_Conf0 set to manual, this setting lets you set a Standard Gateway.
Default is set to 0.0.0.0.
mIP0 When IP_Conf0 is set to manual, you can enter the preferred IP address here. By
default it is set to 0.0.0.0
NetwPrefix0 Here you can set the specific network prefix if required.
mNM0 With IP_Conf0 set to manual, with this setting you can set a Netmask. Default is
0.0.0.0
INSTALLATION AND OPERATION MANUAL
Synapse GFS100 | 5. Settings Menu | 19