EVS Synapse GFS100, Installation And Operation Manual

Page: 32 / 48

7. Events Menu
Introduction
An event is a special message that is generated on the card asynchronously. This means that it is not the
response to a request to the card, but a spontaneous message.
What is the Goal of an Event?
The goal of events is to inform the environment about a changing condition on the card. A message may
be broadcast to mark the change in status. The message is volatile and cannot be retrieved from the
system after it has been broadcast. There are several means by which the message can be filtered.
The events reported by the GFS100-110 card are as follows:
Menu Item Description
Announcements Announcements is not an event. This item is only used for switching the
announcement of status changes on/off. 0=off, other =on
Input_A Input_A can be selected between 0 .. 255. 0= no event, 1..255 is the priority setting.
Input_B Input_B can be selected between 0 .. 255. 0= no event, 1..255 is the priority setting.
Ref-Status Reference can be selected between 0 .. 255. 0= no event, 1..255 is the priority
setting.
Active_Out_A Active output A can be selected between 0 .. 255. 0= no event, 1..255 is the priority
setting.
What Information is Available in an Event?
The message consists of the following items:
• A message string to show what has happened in text, for example: “INP_LOSS”, “REF_LOSS”, “INP_
RETURN”.
• A tag that also shows what happens, but with a predefined number: e.g. 1 (= loss of input), 2 (= loss
of reference), 129(= 1+128 = return of input). For a list of these predefined tags, please see the table
below.
• A priority that marks the importance of an event. This value is defined by the user and can have any
value between 1 and 255, or 0 when disabled.
• A slot number of the source of this event.
24 | November 2021 | Issue 1.00.C