sInp2
This status item indicates the presence and format of a valid signal in input
2. This is displayed as listed under sInp1.
sInp2_VI
Displays the detected VI value found in input 2. This is displayed as listed
under sInp1_VI.
sInp2_WSS-Stnd
Displays the detected WSS-standard value found in input 2. This is
displayed as listed under sInp1_WSS-Stnd.
sInp2_WSS-Extnd
Displays the detected WSS-extended value found in input 2. This is
displayed as listed under sInp1_WSS-ext.
sInp2_s2016
Displays the detected S2016 value found in input 2. This is displayed as
listed under sInp1_s2016.
sInp2_CRC_EDH
This item indicates CRC and EDH errors on input 2. Can be:
•
OK
•
Error
•
NA
sInp2-Map
This indicates the mapping of input 2 when the input format is 3Gb/s
(1080p50 or 1080p60). Can be Level A or Level B. When the input format is
not 1080p60 or 1080p50, this item indicates NA.
sInp3_WSS-Stnd
Displays the detected WSS-standard value found in input3 (CVBS input).
This is displayed as listed under sInp1_WSS-Stnd.
sInp3_WSS-Extnd
Displays the detected WSS-extended value found in input3 (CVBS input).
This is displayed as listed under sInp1_WSS-ext.
sInpCVBS
This status item indicates the detected input format on the CVBS input. This
is displayed as one of the following values:
•
NTSC-J
•
PAL-BGHID
•
NTSC-M
•
PAL-N
•
NTSC-4.43
•
PAL-M
•
SECAM
•
PAL-60
•
SECAM-525
•
NA (no input detected)
IODelayA
Displays the total delay in ms of outputs A1 and A2. Can be a value between
0ms and 15000 ms.
SwitchLnA
Displays what line is detected the switchline for channel A. Can be any line
between 0 and 1125.
SwitchLn_LenA
Displays the length of the detected switchline of Channel A in pixels.
SwitchLn_PosA
Displays the position on the detected switchline where the switch occurred
(in pixels) in Channel A. Only works on blanked switchlines.
FunctionA
Displays the current function outputs A1 and A2. For the card it can only be
Trans, TestPattern or NA.
22
| November 2021 | Issue 1.00.C
Summary of Contents for Synapse GFS100
