EVS Synapse GFS100, Installation And Operation Manual

Page: 20 / 48

Setting Description
S352_Insert S352_Insert enables the Video Payload Identifier insertion in the HANC
space. It enables the user to insert or passthrough (On) the S352 Dynamic
range and colorspace payload. When this menu item is set to On (default), it
will generate a SMPTE ST352-2013 packet and overwrite the existing one
(for both Luminance and Chrominance).When it is set to Off, it will pass the
packet to the output as-is (only on Luminance).In HD 1080i for ATC-LTC
transparency, the user may switch it Off to pass the ATC-LTC HANC
packet on line 10.
Output-Matrix This setting will only work if S352_Insert is set to On. It enables you to set
the colorspace in REC709 (default) or REC2020. When set to either REC709
or REC2020, the S352 data is included in the s352 packet. (This does not
change anything in the picture.)
HDR_Curve_Out The dynamic range is the range of information between the lightest and
darkest part of an image, also known as an image’s luminosity. This setting
enables you to set the dynamic range in standard dynamic range SDR
(default), HLG, PQ or SLOG3. With all of these settings, the S352 data is
included in the S352 packet. (This does not change anything in the
picture.)
Bit_Depth_Out Bit depth is the range of bits being used. This setting enables you to set the
bit depth to Narrow (8bits) or Full (10bits). When set to either Narrow
(default) or Full, it includes this data in the S352 packet. (This does not
change anything in the picture.)
S2016-Line With this setting you select a line in the VBI to where the AFD (SMPTE 2016)
data should be written. Lines 0 till 31 are selectable. By default it is set to
line 17.
Timecode_ins Here you can set if the timecode on the inputs should be copied to the
outputs (On), or to copy the timecode from input 1 to input 2 (Copy 1 => 2),
or to copy the timecode from input 2 to input 1 (Copy 2 => 1). You can also
turn Off timecode insertion.
Default is On.
VITC_Ln_In With this setting you can select what line of the input you want to copy the
VITC data from (only when input is SD). Can be any line between line 7 and
line 22. Default is line 19.
VITC_Ln_Ctrl Here you can choose whether you want to select the line, to where you
want to copy the timecode data to, manually (manual) or use the
information in the ATC_DBB package to select the lines (ATC_DBB package
contains information about the line duplication as well). Default is Manual.
VITC_Ln_625 When VITC_Ln_Ctrl is set to Manual, with this setting you can select a line
between 7 and 22 when the output is SD625. Default is line 19.
VITC_Ln_525 When VITC_Ln_Ctrl is set to Manual, with this setting you can select a line
between 7 and 22 when the output is SD525. Default is line 10.
12 | November 2021 | Issue 1.00.C