EVS Synapse GFS100, Installation And Operation Manual

Page: 17 / 48

#CVBS-Frmt With this item you can set the format of the CVBS input. Possible formats
to select here are (default is Auto):
• PAL-M
• PAL-N
• NTSC-M
• NTSC-4.43
• NTSC-J
• SECAM
• PAL-60
• PAL-BGHID
• Auto (automatic detection and selection between NTSC-J and PAL-
BGHID)
#Out-Frmt With Out-Frmt you can set what the output should be of channel A as
well as channel B. Possible settings are:
• 1080i60 (default) • 1080i50
• 1080p60 • 1080p50 • 1080p30
• 1080p25 • 1080p24 • 1080p24sf
• 720p60 • 720p50
• SD525 • SD625
• AutoA, sets the output format automatically according to what has
been detected).
#IO-Map With this setting you can select the 3Gb/s mapping in case the input
format is 1080p50 or 1080p60. Can be manually set to Level A (default)
or Level B. You can also choose to set it to auto, in which case the GDL
will automatically detect whether the input is Level A or Level B.
#Switch-Back When this setting is set to on, the input selection will switch when the
active input is lost. Set to off will not switch the input on input loss. Set to
once, the switch will only be done once, and will not switch back when
the input fails again. Default is on.
#F_delay F-Delay sets the number of delayed Frames. The available range is from
0 to 250 fields (dependent on the I/O). Default is 0F. The preset master
for this is Out-Frmt, hence the # prefix.
INSTALLATION AND OPERATION MANUAL
Synapse GFS100 | 5. Settings Menu | 9