Pool A now works as follows:
GPI_1 Status
GPI_2 Status
GPI_3 Status
GPI_4 Status
Set Value
0
0
0
0
Up-conv Preset 1
1
0
0
0
Up-conv Preset 2
0
1
0
0
Up-conv Preset 3
0
0
1
0
Up-conv Preset 4
0
0
0
1
Up-conv Preset 5
0
1
1
0
Up-conv Preset 4 (because
highest takes priority)
1
1
1
1
Up-conv Preset 5 (because
highest takes priority)
Pool B now works as follows:
GPI_5 Status
Set Value
0
A out only
1
B out only
Example 2: One Pool in Binary Mode and One in Priority Mode
Let’s say we would like to control the up-converter presets using Pool A (Up_CtrlA set to GPI-A) in binary
mode and the audio presets using Pool B (Audio_Ctrl set to GPI-B) in priority mode. We could do the
following:
•
Set GPI_1 to GPI-A
•
Set GPI_2 to GPI-A
•
Set GPI_3 to Take A
•
Set GPI_4 to GPI Prio B
•
Set GPI_5 to GPI Prio B
Pool A now consists of GPI 1, GPI 2 and GPI 3 (as take), in a binary mode, controlling the Up converter
preset. Pool B now consists of GPI 4 and GPI 5 in a priority mode, controlling the audio presets.
32
| November 2021 | Issue 1.00.C
Summary of Contents for Synapse GFS100
