5. Settings Menu
Introduction
The Settings menu displays the current state of each GFS100/110 setting and allows you to change or
adjust it.
Settings can be changed using the front panel of the Synapse frame (SFR18, SFR08 or SFR04) or with
Cortex. The SCP08 control can also be used. Please refer to "Quick Start" on page 3 for information on
the Synapse front panel control and Cortex.
All items preceded with a # sign are part of the presets.
5.1.
System Settings
Setting
Description
IO-Ctrl
This card has separate presets for the input and output settings under
the ‘SYSTEM SETTINGS’ header. With this item you select how the IO
presets are controlled: manually (Manual) or via GPI-triggers (GPI, GPI-A,
GPI-B or GPI-C). By default it is set to Manual.
IO_Prst_Act
With this item you can manually change the currently active IO settings.
Can be any preset between 1 and 16. By default it is set to 1. All menu
settings that are preceded by the # prefix under the ‘SYSTEM SETTINGS’
header are part of the preset.
IO_Prst_Edit
Here you can select which of the 16 selectable IO settings presets you
want to edit. Changing this will not change the active preset, unless the
currently active preset is the one you are going to edit. All menu settings
that are preceded by the # prefix under the ‘SYSTEM SETTINGS’ header
are part of the preset.
#Inp_SelA
With this item you can select which input you want to use for Channel A.
Can be SDI-1 (SDI input 1), SDI-2 (SDI input 2) or Analog (CVBS in). You
can also choose a Zoneplate or Colorbar as input. Can also be set to Off
to switch off Channel A entirely. The default for this setting is SDI-1.
8
| November 2021 | Issue 1.00.C
Summary of Contents for Synapse GFS100
